Installation Process of COREtec Flooring

Installing the COREtec flooring with the right process keeps it attached or last longer. Properly installed flooring without any damage or issue is the best thing. People love their flooring and are happy to have their floorings properly installed and maintained. You need to pay attention during the installation process of flooring to see any mistakes and help in recovery. Most people prefer to install it on their own to save money.  

No need to worry about the installation of floorings, and in the end, you need to make sure that the COREtec flooring is installed properly. Go through with the blog to know the installation process of flooring. 

6 Easy Steps to Install COREtec Flooring

Step 1 – Organize the subfloor

Make sure that the subfloor is dry, flat, and clean before you start installing the floorings. This is the main step before installing the COREtec product that you should not skip if you want proper installation. 

Step 2 – Install barrier for moisture. 

We know that the COREtec is waterproof flooring, but just like other floors, you need to ensure that the flooring is tested for dampness before installing it. 

In this process, you need to install a barrier for protection from moisture. Moisture may not damage the COREtec flooring due to waterproofing, but it can damage the house walls. 

Step 3 – Start installing of COREtec floors.

Start planks installation from the left towards to the right. Make sure to put spacers at the ends and edges where they connect to the wall. 

Install the flooring and place the initial row well till the end.  

Step 4 – Now, the second row.

Use the initial row of leftovers, then lay down plank flooring on the second row. Make sure to keep 8 inches between the adjacent rows and end joints while installing the flooring. 

Step 5 – Seal the long edges.

Insert the tongues into the groves and drop them in place to seal the long edges. Put the planks towards the already installed planks and make sure that the tongue touches them. 

After that, use a scrap piece to finish the gap between the end of the planks. Use a tapping block and hammer to make sure that the flooring is properly fit. Keep doing this process till the last plank is installed.  

Step 6 – Installing under door jambs.

Effortlessly slide the plank under the door jamb. Lock the long edge with a tapping block and hammer, then lock the short end. Install the floorings properly to avoid further damage and again installation. 

Go with the COREtec flooring if you are looking for high-quality floors that last for decades.

This flooring gives a look and feels to hardwood floors. This is the most demanded and favorite flooring option available in the market. However, it comes with more benefits than other hardwood floorings as it is 100 percent waterproof, easy to clean, maintain, and scratch-resistant. If you are looking for an affordable flooring option with luxury hardwood floors and lower maintenance hassle. 

Conclusion

All the above-mentioned installation processes will help you to install the COREtec flooring by installing it yourself to save a good amount of money. But whenever you feel unable to install the flooring or have made any mistake, we suggest going with professionals for better installation.